BiSensor

Article number: BLC.5206.001 (light grey) / BLC.5216.001 (white) / BLC.5217.001 (black)

The BiSensor is a PIR slight motion sensor and light sensor for Mymesh light control applications like motion detection and daylight harvesting including Bluetooth beaconing for location-based services with the Mymesh Room Control app.

Installation

  • The BiSensor fits perfectly flush mount in a rectangular hole of 42mm x 82mm. The raised edge is 0.8mm to lock the BiSensor in the rectangular hole. The luminaire spring clip holds the BiSensor in place.
  • The BiSensor has no brackets and is fully integrated in the luminaire.

    • Technical

    Electrical
  • Wieland GST pluggable
  • 230VAC (+/-10% 50Hz)
    • Detection
  • Motion Detection
  • Measurement of light level at the ceiling
  • Bluetooth beaconing for location based services
    • Dimensions/weight
    86.3 x 46.5 x 52 mm / 101g
    IP rating
    IP20

    Network

  • Mymesh 2.4GHz

    • Features

    The Mymesh network and the Building Automation System work closely together in controlling the climate ceiling. Light control is locally handled by the Mymesh network using motion- and occupancy detection for switching and daylight harvesting for dimming the lighting. Both TriSensor and Room Control app are connected to the Building Automation System via the Mymesh REST API. The Building Automation System handles the actual room measurements versus the given setpoints via the app.
  • Installed at a typical ceiling height of 3 meter, the occupancy and PIR sensor cover an area of approximately 10m2. Like the climate ceiling the Tri-Sensor needs to cover the area and is applied in a modular grid/pattern.

    • Options

  • RAL7035 Light Grey
  • TriSensor RAL9016 Traffic White
  • RAL9005 Black